IKEA Table Build with Bell-Shape Legs
A tutorial by .
- 2 – Bell-Shape Table & Bench Legs, in desired height and finish (we used 28" x 24" in white)
- 1 – Tabletop
- Tape measure or ruler
- Drill/driver and bit
- Pencil
- 16 – Screws (we used hex head screws)
1 Maker Tutorial
Soo Moon
Maker
I really love the idea of keeping a little bit of history with your furniture: to use components of something old but making it feel contemporary by adding something simple and modern. Maybe it’s a desk that’s been in the family, or a few planks from your first home, but anything can become an heirloom!
Also, I’m mostly a behind-the-scenes type, so if you see me make a cameo, please know I was coerced, guilt-tripped, and/or heavily bribed.
Also, I’m mostly a behind-the-scenes type, so if you see me make a cameo, please know I was coerced, guilt-tripped, and/or heavily bribed.
Sometimes all you need is something simple and practical to personalize your space. Our Bell-Shape Table and Bench Legs make it easy to transform a premade tabletop into a special piece of furniture.
Step 1:
Position the legs
Lay your tabletop on the ground, drill side up. You can mess around with the placement of your legs to be closer or further apart (you just want it stable enough so it won't tip over if there’s too much weight on one side). Use a tape measure or ruler to place your legs, and mark each slot with a pencil.
Step 2:
Drive those screws in
With your leg placement established, drive the screws straight down through each leg slot (you can have a helper hold down the legs while you drill, but we didn't find that necessary). Once all the screws have been driven in, check for any wiggle jiggle in the legs.
Step 3:
Start using your new table
Have a buddy help you flip the table over (or beast it yourself) and admire your work!