The Apron Table Leg | Set of 4

The Apron Table Leg comes in sets of 4.  A light and sturdy design that saves you on cost, shipping and perfectly stackable! 

Wood and hardware not included. 

Choose from table heights 28"-39" and from our 9 beautiful Tiger Drylac powder-coated finishes.

These nifty legs allow you to build out a frame with 1x3 dimensional lumber that improves rigidity and appearance.  Add any wood species you prefer for the 1x3 apron and table top for a personalized result. 

The hole pattern on the fascia gives these legs an industrial look paired with an eye-catching rounded radius.  You are sure not to see these anywhere but Semi Exact.

Designed and Precision cut by our team in Nevada using 14 Gauge American recycled sheet metal.

The Apron Leg foot takes a 3/8" rubber stopper as for floor protection. Not included with purchase.

Finishes from left to right top to bottom - Textured Matte Black, Buttercream, Moondust Grey, Glacier White, Metallic Silver, Lava Red, Casual Turtle Green, Midcentury Blue, Low Gloss Clear Coat, Raw

Clear & Color Powder Coats

Our powder-coat finishes are scratch-resistant and rust-proof, so they don't need much care. Just be sure to touch up any exposed steel if you happen to drag them across rough surfaces, such as pavers, or scrape them with something sharp.

Raw Steel

Raw steel arrives with a thin layer of residue to protect it from rust while in transit. Sealing your raw steel with wax, paint, or a clear coat will keep it looking its best (or you can let it develop a natural rusted patina).

• Raw steel legs ship with wax for sealing
• Apply a rust-inhibitive clear coat rather than wax if using outdoors
• Sprayed finishes work best for paint or clear coat (use products that are suitable for metal)

Measure twice, cut once. We provide our specs right up front so you have the details you need to plan your build. If you have any questions about what size you should choose, just drop us a note.

Our powder-coat finishes are scratch-resistant and rust-proof, so they don't need much care. Just be sure to touch up any exposed steel if you happen to compromise the finish.

Measure twice cut once.  

1.  Determine the length and width of your table top.

2. Cut your long end 1x3 aprons to be 4" shorter than the length of your top. Cut your short end 1x3 aprons to be 6" shorter than the width. (this will give you a 2" overhang all the away around your table) Apply a finish to the aprons as needed.

3. Attach your 1x3 wood aprons using #10 3/4" Pan head wood screws to your table legs (these are visible, choose wisely). You will need 40 total screws to attach your aprons.  Attach long aprons first and flush with interior of leg, then attach your short end flush with long apron.  Pro tip: Easy way to attach aprons is with legs upside down.

4.  Once you've completed your table frame now you can attach your finished wood table top.  Each leg has 6 holes to attach to your top (these are not visible).  Be sure to use the correct length hardware according to the thickness of your top.  All hole sizes are .25", a size #10 diameter wood screw will suffice.  Center your top on the table frame and begin fastening.

5. Enjoy your new table or desk!

All items are able to be returned within 14 days from your order as long as they are in new condition. We also accept returns for workmanship defects within the lifetime of the product. Learn about our warranty here.

• Returns requested within 14 days of the delivery date and in original packaging, that are unused, will be accepted.
• Our original shipping and delivery fees are not refundable.
• Returned goods have a 30% restocking fee.
• There is a flat rate $35 return label cost for orders of $250 or less, for orders of $250 or more the return shipping will be at cost. If you’d like to use your own label feel free to do so and see below for shipping instructions.

Policy On Changing, Modifying or Canceling A Current Order:

If you have an order with us and would like to make a change or cancel, we’d love to accommodate. We highly encourage you to reach out as soon as possible. Your order is custom and we want to make it perfect for you!

With a custom piece, once we start on it, it can only be made in your specific dimensions. To modify or cancel an order already in production creates waste in material and labor. We know talking about fees is no fun, yet it is a reality and changes mid production incur real costs. We have kept these fees low and kept them in line with reflecting the efforts of our team's professional work.

Here are the windows within which we accept changes/modifications and any fees associated.

(Change/modification fees must be paid over the phone at the same time as requested. Fees will be deducted from the subtotal and all shipping costs will be fully refunded if canceled.)

Hairpin Legs/ Hairpin shelf & desk brackets, floating shelf brackets, bent flat bar brackets with and without lip:
• 24 hours, free of charge.
• Changes after 24 hours will have a change/ cancelation fee of 25%

Flat Bar, Tube Steel, Spider Legs, Platform Bed, Box Bed:
• 48 hours, free of charge.
• Changes after 48 hours will have a change/ cancelation fee of 25%