2" x 2" Single Metal Table Leg
semi exact
What you need to know
What you need to know
A no brainer. Our most used tube steel now a single leg for all your build needs.
2 x 2 single tube Metal legs are for the minimalist who wants a modern look with less steel to let the room breathe a little.
Offered in heights from 4"-40" you can select just what you need.
Precision manufactured by our team in Nevada from recycled steel, precision cut, sandblasted, and then powder coated for a clean finish - each leg is built to last a lifetime.
We've engineered them to be very rigid with a wide baseplate to keep your project sturdy. We include a threaded insert that is 3/8"-16 and offer leveling feet and casters that you can add to your build.
Casters will add about 4" in height (3.8") when screwed all the way in. Leveling feet will add 0.25" to 1" to the height depending on how far you screw in the foot.

Build Instructions
Build Instructions
You can attach your 2x2 Tube Steel Legs with just a few simple tools. Position them flush with your surface, or move them in from the edge. With preformed slots, they're easy to attach. Here are a few basic steps to help you get started.
- Step 1: Turn your project surface and the 2x2 Tube Steel Legs upside down. Place the legs on top of the surface, and use a tape measure to position them where you'd like them. (Be careful to keep the legs steady.) Mark each slot with a pencil, and add the leveling feet, if desired.
- Step 2: Remove the 2x2 Tube Steel Legs and pre-drill holes through each pencil marking into your surface. (Pre-drilling makes things easier and helps avoid damaging your surface material.)
- Step 3: Reposition the 2x2 Tube Steel Legs and drive fasteners through each hole. Fasteners will need to be long enough to account for the thickness of the base and about half the surface. (If attaching legs to concrete or metal, use concrete or metal fasteners.)
- Step 4: Confirm the 2x2 Tube Steel Legs are securely attached, then turn your project right side up. (Have someone help you lift larger projects to prevent pulling fasteners out of the surface material.)
Shipping & Returns
Shipping & Returns
Any item can be returned in new/unused condition and in original packaging. Returns are accepted within 14 days of delivery
- Returns requested within 14 days of the delivery date and in original packaging, that are unused, will be accepted.
- Our original shipping and delivery fees are not refundable.
- Returned goods have a 30% restocking fee.
- There is a flat rate $35 return label cost for orders of $250 or less, for orders of $250 or more the return shipping will be at cost. If you’d like to use your own label feel free to do so and see below for shipping instructions.
Unfortunately, we are not able to accept returns at this time for international orders.
Damage happens, and we will make it right! If your order arrives damaged or defective just let us know within 14 days of delivery. Email photos of the damage along with the packing slip to makewith@semiexact.com.