DIY Outdoor Slat Table & Bench Leg

3x 1 Recycled Tube Steel brings this striking leg together.  Created to be paired with our DIY Outdoor Couch Kit - these square shaped legs have a 1.5" slot for dimensional lumber, butcher block or your own uniquely sourced wood. 

Legs sold separately - select a quantity of 2 to make a table or bench.

This leg can make a coffee table for your outdoor couch, a desk, work table, an outdoor dining table with matching bench or whatever's clever to you.  The slatted design offers superb rigidity for a lasting & stable surface. These legs can be used indoor or outdoor.  Heavy duty with striking beauty- these and you will make furniture that last.  Choose from 4 sizes & 8 finishes.  

Casters will add about 4" in height (3.8") when screwed all the way in. Leveling feet will add 0.25" to 1" to the height depending on how far you screw in the foot.

Finishes from left to right top to bottom - Textured Matte Black, Buttercream, Moondust Grey, Glacier White, Metallic Silver, Lava Red, Casual Turtle Green, Midcentury Blue, Low Gloss Clear Coat, Raw

Clear & Color Powder Coats

Our powder-coat finishes are scratch-resistant and rust-proof, so they don't need much care. Just be sure to touch up any exposed steel if you happen to drag them across rough surfaces, such as pavers, or scrape them with something sharp.

Click here for product drawing

You can attach your Slat Legs with just a few simple tools( Circular Saw, Rubber mallet, Hand Drill/Driver).  Here are a few basic steps to help you get started.

Step 1: Turn your project surface or slats and the Slat Legs upside down. Be sure to select straight, not bowed horizontally or vertically dimensional lumber, and place next to each other on flat surface to see if they lay flat and nestle nicely to one another.  Place slats legs next to each other in best format slide lumber/slats/top into the 1.5" slot, starting with edge pieces first (may need a cutting, sanding and rubber mallet to knock these into place as slot edge can get tight) . Mark the wood through each mounting hole with a pencil.  Pre-drill pilot holes no more than half of the wood thickness.

Step 2 : Attach your legs using #10 1.25" Truss head wood screws at for optimal fastening.  

Step 3 : Screw in Leveling feet or Rolling Casters

Step 4 : Confirm the Slat Legs are securely attached, then turn your project right side up. 

Step 5 : Enjoy!

For dimensional lumber builds use the following:

Coffee table /Desk Table : (3) 2" x 8" cut to desired length. (4'-5' foot ideal)

Bench Seat : (2) 2" x 8" cut to desired length (4' foot ideal, use extra leg for longer benches) may need to rip 1" of wood off one slat for better fit.

Dining Table : (4) 2" x 10" cut to desired length  (Up to 6' foot ideal, if going longer use metal brackets underneath for support or third leg)

**Select straight lumber not bowed if possible. Sanding/cutting may be necessary to fit into slot

As a company that focuses on creating custom sizes and that manufactures to your specification, returns can get a little tricky. We can accept returns for Quick Ship items within 30 days of delivery. 

We do not currently accept international returns. 

For our full return policy, please go here.