Hairpin Legs

Our hairpin legs are a midcentury modern, timeless classic ready for your next build.

Made in our Wisconsin factory from recycled steel, each haripin leg is built with care to last a lifetime. 

Our standard hairpin legs are great for projects where the top isn't too heavy - for a heavy top or the most rigidity, we recommend 3 Rod hairpin legs or our other table bases.

Measure twice, cut once. We provide our specs right up front so you have the details you need to plan your build.

For Hairpin Legs, we offer two thicknesses of the metal rod: 3/8" (standard) and 1/2" (heavy-duty). 

Standard (3/8" diameter)

Click on drawing for larger image

Heavy-duty (1/2" Diameter)

Click on drawing for larger image

Clear & Color Powder Coats

Our powder-coat finishes are scratch-resistant and rust-proof, so they don't need much care. Just be sure to touch up any exposed steel if you happen to drag them across rough surfaces, such as pavers, or scrape them with something sharp.

Raw Steel Care

Raw steel arrives with a thin layer of residue to protect it from rust while in transit. Sealing your raw steel with wax, paint, or a clear coat will keep it looking its best (or you can let it develop a natural rusted patina).

• Raw steel legs ship with wax for sealing
• Apply a rust-inhibitive clear coat rather than wax if using outdoors
• Sprayed finishes work best for paint or clear coat (use products that are suitable for metal)

You can attach your Hairpin Legs with just a few simple tools. With preformed holes, they're easy to attach. Here are a few basic steps to help you get started.

• Turn your surface upside down and use a tape measure to position your Hairpin Legs.
• Mark each base plate hole with a pencil, and remove the Hairpin Legs.
• Pre-drill a pilot hole over each pencil mark. (Pre-drilling makes things easier and helps avoid damaging your surface material. Marking your drill bit with a piece of tape will help ensure you don't drill too far.)
• Reposition your Hairpin Legs, and drive your screws/fasteners through the base plate holes into your surface.
• Confirm the Hairpin Legs are securely attached, then turn your project right side up. (Having someone help you lift larger projects will keep screws/fasteners from pulling away from your surface material.)

All items are able to be returned within 90 days from your order as long as they are in new condition. We also accept returns for workmanship defects within the lifetime of the product. Learn about our warranty here.

USA Customers
Any item can be returned in new/unused condition and in original packaging. Returns are accepted within 30 days of delivery 

• Returns requested within 30 days of the delivery date and in original packaging, that are unused, will be accepted.
• Our original shipping and delivery fees are not refundable.
• Returned goods have a 10% restocking fee.
• There is a flat rate $15 return label cost for orders of $250 or less, for orders of $250 or more the return label will be at cost. If you’d like to use your own label feel free to do so and see below for shipping instructions.

International Customers
Unfortunately, we are not able to accept returns at this time for international orders.
 

Defective/Damaged Orders:
Damage happens, and we will make it right! If your order arrives damaged or defective just  let us know within 30 days of delivery. Email photos of the damage along with the packing slip to makewith@semiexact.com. 

Click Here for our Terms of Service